Rooftop HVAC units
$900 – $2,200
Package units, condensers and air handlers onto flat commercial roofs. Boom truck for 1–3 stories, hydraulic crane for bigger units or deeper setbacks.
Boom trucks for rooftop units and hot tubs. 40 to 300 ton hydraulic cranes for steel, trees, generators and modular sets. One call, one quote, a crane on site when you said you needed it.
Typical installed ranges including the operator, a 4-hour minimum and travel inside our core area. Your quote is firm once we have weight, reach and a site photo.
$900 – $2,200
Package units, condensers and air handlers onto flat commercial roofs. Boom truck for 1–3 stories, hydraulic crane for bigger units or deeper setbacks.
$1,400 – $3,800 / day
Oaks and maples over the house, storm-damaged trees, anything a bucket truck cannot reach safely. We work with your tree service or bring one.
$650 – $1,400
Over the house, over the fence, onto the deck. The most common residential lift we do between Danbury and the shoreline.
$1,200 – $4,500
Beam sets, roof trusses, precast stairs and planks. Riggers and a signal person included on structural picks.
$1,100 – $3,500
Standby generators onto pads, utility transformers, switchgear. Weights and dimensions from the spec sheet get you an exact quote.
$800 – $2,000
Prebuilt sheds over a fence, modular classrooms, shipping containers onto cribbing. Quick picks, usually under the 4-hour minimum.
Every rate includes the operator and fuel. Minimums apply because a crane has to travel, set up, and be rigged down whether the pick takes ten minutes or six hours.
| Equipment | Rate | Minimum | Typical use |
|---|---|---|---|
| Boom truck, 17–30 ton | $175 – $275 / hr | 4 hours | HVAC units, hot tubs, sheds, small trees, roofing material |
| Hydraulic truck crane, 40–75 ton | $275 – $475 / hr | 4–8 hours + travel | Large trees over houses, steel beams, generators, tight reaches |
| All-terrain crane, 100–300 ton | $4,500 – $12,000 / day | 1 day + mobilization | Steel erection, cell towers, bridge work, long reaches with heavy loads |
| Rigger / signal person | $95 – $150 / hr | 4 hours | Required on structural picks and any blind lift |
| Permits and escorts | At cost + $150 | CT DOT oversize travel, municipal street or sidewalk closures |
Rates shown are for 2026 and for Monday–Friday daytime work. Nights, weekends and emergency storm response carry a premium stated on the quote.
Weight, reach, height, address and date. A phone photo from where the truck would park is worth more than any description.
Load chart, outrigger footprint, ground conditions, overhead wires and permits get checked. You get a written price with the minimum and any permit costs broken out.
The operator does a site walk, sets up on mats, makes the pick, rigs down. Most residential lifts are finished inside the 4-hour minimum.
Based in the Naugatuck Valley off Route 8, which puts most of the state inside a 90-minute drive. City pages below cover permits and the jobs we see most in each.
Operated boom trucks run about $175–$275 per hour with a 4-hour minimum. Hydraulic truck cranes in the 40–75 ton range run $275–$475 per hour with a 4 to 8 hour minimum plus travel. All-terrain cranes of 100 tons and up are quoted as day rates, typically $4,500–$12,000 including mobilization. Most residential jobs, a rooftop HVAC unit, a hot tub set, a crane-assisted tree removal, land between $900 and $3,500.
Always. Every crane comes with an NCCCO-certified operator. Bare crane rental without an operator is not offered in Connecticut for liability and insurance reasons. Riggers and signal persons are added by the hour when the lift calls for them.
Boom trucks can often be scheduled within 2–5 business days. Larger hydraulic and all-terrain cranes typically need 1–2 weeks, longer if a street closure or an oversize travel permit from CT DOT is required. Storm and emergency work is handled case by case.
What is being lifted, its approximate weight, how far the crane has to reach from where it can park to where the load lands, the height involved, the job site address, and the date. A photo from the street helps more than anything.
Outriggers go on timber or composite mats that spread the load. On a residential driveway, a boom truck on mats is usually fine. Soft lawns, septic fields and paver driveways are flagged during quoting and we plan the setup around them.
Yes. Oversize and overweight travel permits through CT DOT, and municipal street or sidewalk closures in cities like New Haven, Hartford, Bridgeport and Stamford, are arranged as part of the job and billed at cost plus coordination time.
General liability and riggers liability certificates are provided with every quote, with your property or GC named as additional insured on request.
Text a photo of the site and the weight of the load. You will have a ballpark before the end of the day and a firm quote by the next.